EDMI

Product Details :

Kwh MeterAccuracy

• Class 0.2S (IEC62 053-23)

Voltage

• Nominal - 57.7/100V - 230/400V

(phase to neutral)

• Burden - <10VA / phase @ Vn (3

phase)

• Frequency 45-65 Hz

Current

• CT Range - 1/4A and 5/10A

• Short time over-current - 20 times

the Imax for 0.5 seconds

• Burden - <0.5VA/phase

Auxiliary Supply Options

• 240V, 110V (other voltages available

on special order)

Measurement Modes

• 3 phase 3 wire (2 element)

• 3 phase 4 wire (3 element)

Measured Energy Values

• Import/Export Wh, varh and VAh

• Absolute Wh, varh and VAh

• 4 quadrant Wh, varh and VAh

• Phase A, B, C or Total

Other Measured and Displayed

Values

• Power: W, var, VA

• True RMS Voltage (3 phase)

• True RMS Current (3 phase)

• Power factor

• Frequency

• Phasor angles

Quality of Supply Features

• THD

• Unbalance

• Fundamental Voltage, Current and

Watt measurement

• Harmonics (up to the 50th)

• Sag / Swell

- 5 cycle resolution

- Records time/date/phase/duration

/worst excursion

- Programmable trigger levels

Pulsing IO

• 2 inputs + common ground

• 2 outputs + common ground

• 6 outputs + common ground

• 110/240V BOSFET outputs

(IEC 62053-31 class A and B)

• Up to 16 inputs or outputs via

optional extended IO cards

Communications Ports

• Local - ANSI type 2 optical or

FLAGTM (IEC 61107)

• Remote - Isolated RS485, RS232

or both

Communications Features

• ANSI Type 2 Optical

• IEC 61107 / IEC 62056-21

+ VDEW 2.0 extensions

• RS232 (RTS/CTS and DTR/DCD)

• RS485 (2 or 4 wire multidrop)

• SCADA

• Modems

(PSTN/GPRS/GSM/CDMA)

• MV90TM

• MODBUS®

• UDP/IP over PPP/GPRS

• DNP3 level 2

• IEC 870-5-102

• Optional internal modem

power supply

Temperature Range

• Operating -25 to +60°C

• Storage -25 to +80°C

Humidity range

• 0 to 95% non condensing

Time Keeping

• Accuracy: 0.5s/day (over full

temperature range)

• Backup time - 2 years

without power

• Backup type - optional lithium

battery 700/1200mAh, 3.6V and

SuperCap (single/dual)

• Battery shelf life of 20 plus years

• Mains synchronised or internal

crystal time keeping. Mains

synchronised reverts to internal

crystal on loss of all phase volts

Time Of Use

• 8 rates plus unified rate

• Up to 12 separate import and

export registers

• Up to 200 programmable

special days

• Daily, Weekly, Monthly,

Yearly, Special

• 13 or more previous periods

• Block or Rolling Maximum Demand

• Time of Maximum Demand

Load Survey / Profile

• NEM compliant

• Over 900 kilobytes of fl ash data

storage space.

~ 3100 day-channel capacity at 30

minute intervals

~ 1875 day capacity at 30 minute

intervals / 2 channels

~ 520 day capacity at 15 minute

intervals / 3 channels

• Up to 50 channels

• Interval programmable from 1

second to 1 month

• Multiple independent surveys

• Energy, instantaneous readings,

pulsing inputs, average/min

/max readings

LCD Display

• 16 character by 2 line

alphanumeric display

• Programmable units, multipliers

and leading zeros

• Up to 64 user definable

screen displays

• Displays any available

meter parameter

• Optional 20 character by 4 line

alphanumeric display

Extensions for Customer

Applications: standard or to

order

Mk6E GENIUS plus®meter

continues the successful concept

of meter “Extensions” introduced

in the original Mk6 Genius® Using

“EziScript”, complex register

manipulations can be performed

allowing sophisticated meter

functions. New Extensions are

constantly under development,

contact us to find out the

latest updates.

Some examples of currently available

Extensions are:

• Send SMS at percentage of

maximum demand, or equipment

failure alarm

• Maximum demand control of loads

via pulsing outputs

• Time Of Use history etc

Software

• EziView Windows® software

(optional), can be used for

programming and reading

the meter

• EziView also allows offline

configuration of tariff programs

and all meter parameters, for

later upload

Dimensions

• 262mm (L) 175 mm (W) 93mm (D)

Product Details :

Kwh Meter Measurement

• Class 0.5S & Class 1 (MID Class C

& Class B)

• Compliance with IEC 62052-11,

62053-21, 62053-22, 62053-23

• Compliance with AS 62052.11,

62053.21, 62053.22, 62053.23

• Compliance with EN 50470-1,

50470-3

• 3 Phase 3 Wire, 3 Phase 4 Wire

Voltage & Power Supply

• Nominal Voltage Vn: 3x 230/400V

•

Nominal Voltage Vn : 3x 57.7/100V -

• Burden: <10VA/phase @ Vn

(3 Phase) (IEC 52053-61 Compliant)

• Frequency Range:

45Hz – 65Hz

• Option for Auxiliary

Supply & UPS

Current

• CT Range: 5(10)A

• CT Meter: 20 times Imax for

0.5 seconds

• WC Range: 5(80)A

• WC Meter: 30 times Imax for

0.5 cycles

• Burden: <0.5VA/phase

Measured Energy Values

• 3 Element 4 Quadrant

• Import/Export Wh, varh and VAh

• Per Quadrant Wh, varh and VAh

• Absolute Wh, varh and VAh

• Phase A, B, C & Total

Other Measured &

Display Values

• Power: W, var, VA

• True RMS Voltage/Current

(3 Phase)

• Power Factor, Frequency,

Phasor Angles

Power Quality Indication

• Total Harmonic Distortion (THD)

• Sequence Components

• Waveform Display

Sag / Swell

• 5 Cycle Resolution

• Records Time/Date/Phase/Duration/

Average & Worst Excursion

• Programmable Trigger Levels

Inputs / Outputs Configuration

• Standard Top Row I/O:

- Up to 4 I/O Total, Independent

Common Ground, 4KV Isolation

- Options Include: Passive/Active

Inputs, S0/BOSFET/Relay Outputs

- Passive Input Voltage: 5V, 12V, 48V,

110V, 240V

- Active Input Voltage: 12V

- BOSFET Output: 240V, 100mA

maximum

- S0 Output: 27V, 27mA maximum

- Relay Output: 240V, 5A/2A

• Extended Bottom Row I/O:

(Optional)

- As per Standard I/O

• Output Pulse Width: 1ms to 100ms

Environmental

• Operating Range: -25˚C to +60˚C

• Limit Range: -40˚C to +70˚C

• Storage Range: -40˚C to +80˚C

• Relative Humidity: Up to 95%

non-condensing for 30 days

• Ingress Protection: IP54

• Salt Spray Resistant

(IEC 60068-2-11)

Large LCD Display

• Large 7-Segment Display

• Display Digit Size: 10.7mm (H)

• Up to 60 User-Defined Screens of

any Meter Parameter

• Definable Enunciators

• Display Available without

Mains Power

Load Survey / Profile

• AMI Ready

• Up to 2.1 Megabytes of

Non-Volatile Memory

• Over 7200 Days (20 Years) Storage

(2 Channels, 30-Minute Intervals)

• Up to 32 Channels

• Intervals Programmable from 1 to

60 Minutes

• 2 Independent Surveys

• Energy, Instantaneous Readings,

Pulsing Inputs as Channel Sources

• Ability to Store Average

/Minimum/Maximum Values for

Interval Duration

Time Clock & Calendar

• Accuracy (internal) within 15

Seconds per Month at 23˚C

• Backup Time of 10 Years without

Power (Lithium Battery)

• Mains Synchronised or Internal

Crystal Timing (Selectable)

• Supports Daylight Saving Time

• Supports Gregorian or

Persian Calendars

Time of Use

• Up to 8 Rates plus Unified Rate

• Up to 32 Separate Import

& Export Registers

• Daily, Weekly, Monthly,

Yearly & Special

• Up to 200 programmable

Special Days

• Up to 61 Previous Periods plus

Period Totals

• Block or Rolling Maximum Demand

• Energy, Pulsing Inputs

• Time of Maximum Demand

Physical Dimensions

• Standard Version: Approx. 262mm

(L) x 175mm (W) x 95mm (D)

• Weight: Approx. 2.0 kg

Security

• Multi-level Security

(Username & Password including

Encrypted Log-in)

• Up to 7 Independent

Security Levels

• Up to 6 Individual Users

Tamper Detection & Alarms

• Provision for Sealing with

Conventional Wire or Plastic Seals

• Bypassing & Reverse Current

• Advanced Tamper Detection

and Logging

• Pre-programmed Alarms for Meter

Self-check

• Alarms Trigger LEDs, Enunciators,

Relay Outputs or

Communications Event

• Alarms are Stored in Event Logs

• Option for Magnetic Immunity

Communications

• 3 Independently Working

Communication Ports

• Optical Port: FLAG (IEC 62056-21)

or ANSI Type 2 (ANSI C12.18)

• RS-232 with Modem Power Supply

(2G/3G Supported)

• RS-485 Multi-Drop (4 or 2 Wire,

RJ45 or Screw Terminal)

• Option for second RS-232 Port

• UDP/IP GPRS/PPP Capable

• Option for Zigbee Mesh RF

Battery Options

• Internal Battery

• Replaceable External Battery

• Supercap

Software

• EDMI EziView Software Available

for Meter Programming & Reading

(Windows 7/Vista/XP/2000)

• EDMI MultiDrive Software

available for Large Scale AMI &

AMR Solutions (Windows 7/Vista/

XP/2000)

• Supported by many popular

third-party multi-vendor AMR

Product Details :

Exim Kwh Meter Kwh Meter Is Used For Electrical Energy Transactions (Kwh) Between Two Energy Suppliers, Which Kwh Kwh Sent And Received Are Recorded Separately In Kwh Meters.

- Kwh Meter Edmi Mk6n

- It Is Widely Used In Pln

- Compatible For System Amr (Automatic Meter Reading)

- Can Be Read From A Distance (Remote Reading) Using Gsm Or Gprs Network

- Ability To Store Data Load (Load Profile), The Data Billing (Billing History) And Recording Events That Occur In Kwh Meter (Event Log)